The range is completed with some specific solutions for industrial sector: Italcrom proposes products for industrial companies that use varnishes for their production cycle (mechanical and metallic constructions, building and road machines, plants) and for enterprises that work in the protection and decoration field of industrial structures.

Advice for a best result

As for Building sector, in the industrial sector in order to obtain good results it's necessary to follow the painting cycles. However, it's very important to choose the more suitable cycle, from the technical and economic point of view. In order to help in this choice, Italcrom has got, in its organization, a Technical Assistance Service in order to help the client in the phase of the choice of the cycle to adopt, but also during the work and however every time that is necessary.

Italcrom proposes

Antirust

Resfo s. 624
Fast drying antirust with zinc phosphates. It's suitable to protect iron structures.

Fenix s. 615
Oilphenolic antirust for brush steels and galvanized sheets. Using in the light industrial atmophere when you want an hard film, good elasticity and high abrasion resistant.

Gym s. 617
Antirust with clorocucciù, with high anticorrosive power, high adherence and good penetrability.

Sottofondo Italit s. 637
Intermediate product with clorocaucciù. Applying on clorocaucciù antirust. It's suitable as primer between antirust and enamel.

Sylicon s. 618
Silicone primer with zinc. Using for high temperature in aggressive atmospheres.

Zincante a freddo Cod.6232230
Antirust with zinc for steels supports. It's suitable to protect steel supports subordinates to atmospheric and chemical attacks. It's very good to paint hydraulic turbine, discharge valves and water pipages.

Primer Epovinil s. 614
Eposivinilic covering, antirust for steel and galvanized support.

Zincoep s. 625
Bicomponent organic produst. It's suitable to galvanize of high protection. It's possible to apply on sandblast iron and galvanized steel.

Stucco nitro a spruzzo s. 510 - Stucco nitro a spatola s.509

It's a product based on nitro cellulose. It has a high covering power, fast drying and it easy to sand. Italcrom produces two versions of this product: infact it's possile to apply with spray or spatula.

Stucco Epossidico s. 506

It's a stucco, based on special epossidic resins. The main charateristic is getting hard with the minimum of shrink, until to 300 micron of thickness. For this reason, it's suitable to get stucco of hole, fissure, deep metal sheet imperfections in the fabrication of metal furniture and in the metal buildings in general.

Stucco nitro a trafila s. 505

It's a pigmented stucco with very high grinding fineness. It's suitable to prepare wood and as primer for staff of gold frame.

Stucco sintetico a trafila s. 503

It's a pigmented stucco good in order to rase or to get stucco for frame made of wood.

Epofond s. 657
Epossidic antirust to apply on galvanized sheet. It has high adherence, good penetrability and high anticorrosive power.

Turapori nitro Cod.6300000
Nitro transparent foundation, suitable for sending dry the wood. It has a good covering power and fast drying.

Sottofondo poliuretanico Cod.6290000

Transparent filler for wood, hardening with air. It has a high covering power and very good hardness.

aa

Enamel and finishes

Smalto antiruggine a rapida essiccazione s.228
Antirust, applying with one hand. It's fast to use and the product is enough shining.

Cromloid opaco s 271
Industrial enamel, based on nitro. It has high covering power, very good hardness and good thinning. It's suitable to give a good finish, with egg peel effect, to metallic machines.

Cromloid satinato s 272
Nitro alkyd enamel, based on nitrocellulosa. It's very suitable for industrial work when you want to obtain a satiny effect, fast drying and economic cost. It's suggested for a cheap finish for agricultural, building, industrial machinaries and for iron surface located inside.

Smalto martellato nitro s. 276

Hammered enamel. Use in order to paint metallic furnitures, shelves, tool machines, scientific instruments and metallic small parts, when you want to obtain the particular hammered effect.

Smalto universale lucido s. 204
It's a polyvalent enamel based on acrilate vinyltoluene polymer. It's suitable to paint wall, masonite and iron.

Ondalux s. 298
Polyurethan catalyst enamel, hardens at air. It's characterized from a good covering power, high resistance to atmospheric agents and to chalking in industrial atmosphere. It has also modest painting, very good toughness and high hardness. It's particularly suitable for protection of systems in industrial or sea atmosphere.

Ondalux H.S. s. 203
It's an acrylic, isocyanic enamel. It's suitable to coat with paint sheet handworks that need high resistance to U.V., stability for yellowing and elevated performances during the time. It's very suitable for industrial body sector (for bus, trucks, precast houses made of sheet) and for antiacid and antialkyd finish hand (insutrial floors).

Smalto per alta temperatura s. 211
Siliconic enamel, resitance until to 250° C. It's suitable to paint motors, pipes and whichever thing could catch up high temperatures.

aa

Epomobil s. 274
Catalyst epoxy enamel. It has a half-luster look, very uniform, that lets to obtain a film, characterized from a considerable thickness, very good hard-ness and chemist and atmospheric resistance, with a only hand of product. It can be applied on cement, plate, galvanized sheet. It's very suitable for metallic furnishing, box made of galvanized sheet and as finish for chemical plant.

Epovinil s.233
Catalyst epoxy vinilic enamel, characterized from good gloss, resistance from alkali, acids and water, easy to re-apply (limitlessly in the time), and it hasn't chalking problems. For these reasons, it's suitable to paint tanks, industrial plant, railway and street bridges and crane.

Epovinil H.S. s.232
Catalyst epoxy vinilic enamel. It's very suitable as finish, in high chemestry resistance systems for outside exposure. Repainting without limitations of time.

Epocatrame Cod.2022125

Epoxy protective enamel.It's in a position to solve multiple cases of difficult painting, having a good resistance to sweet water, water of sea, dissolvents and organic substances. It can be applied in cement and plate (for tanks or pipes to put underground).

Epogroff s.278

Brillant epoxy enamel, with emboss effect. It can be applied with one hand on degrease and clean supports made of galvanized sheet, glass-reinforced plastic, iron, aluminum and light alloys .

Epogroff semiopaco s.206

Semi-opaque epoxy enamel, with emboss effect. It can be applied with one hand on degrease and clean supports made of galvanized sheet, glass-reinforced plastic, iron, aluminum and light alloys .

Italit s.238

It's an alkyd, clorocaucciù enamel, with modest brush marks, very good adhesion. It's very suitable to protect metallic carpentry in industrial atmosphere.

Italit insaponificabile s.234

It's a clorocaucciù pure enamel, with high chemical resistance, plasticized with clorine paraffin. It's the best protection for iron constructions, located where there is a strong acids concentration, salt, alkyds and specially watery vapor.

Italit insaponificabile semilucido s.235

It's a clorocaucciù pure opaque enamel, with high chemical resistance, plasticized with clorine paraffin. It's the best protection for iron constructions, located where there is strongly concentration of acids, salt, alkyds and specially watery vapor.

aa

Piracrom s.260

It's an alkyd, melaminic enamel with good covering. It's very suitable to paint metallic furniture, shelvings, electric board, panels, etc

Martellato a forno s.266

Synthetic enamel, used in order to obain the particular hammered effect. It's suitable to paint metallic furniture, shelvings, tools machines, scientific metallic small parts.

Smalto antiruggine per lamiere zincate a solvente s.205

It's an enamel, used to paint galvanized iron without primer, because the product joins perfectly on the galvanized surface, effectively and durably protecting from the white corrosion. It's very suitable to paint inside and outside walls made of galvanized sheet, guard-rail, gutters and skylights.  

Smalto antiruggine per lamiere zincate all’acqua s.201

Acrilic water based enamel. It has high anticorrosive power and good aesthetic aspect. It's suitable to finish (with one hand) handworks made of galvanized sheet or iron like precast structures and gutters.

Hydrocoat s.222

It's a satiny water enamel. It's suitable to paint, with one hand, supports made of polycarbonate, polyester and to finish metallic supports, treated with antocorrosive primer. The product has good resistance to water and climatic inclemencies.

Gel Coat s.281

It's an enamel based on resins. It's suitable to paint hand works made of glass-reinforced plastic.

Gel Coat Paraffinato s.282

It's an enamel based on resins. It's suitable to paint hand works made of glass-reinforced plastic.

Gel Coat Autoestinguente S.294

It's an enamel based on resins. It's suitable to paint hand works made of glass-reinforced plastic, when you want to guarantee self-extinguish.

Varnishes for wood 

Vernice trasparente ignifuga Cod.1060000

It's a varnish for passive protection of fire.

Vernice nitro trasparente Cod.1130000

Product for wood finishing, based on nitrocellulosa, that gives a smooth and opaque aspect, resistant to the scratch.

Vernice nitro trasparente non ingiallente Cod.1140000

It's a nitrocellulose varnish with good adhesion and gloss, good covering power and very good resistant to the yellowing. Thanks to this characteristics, it's suitable to finish things made of wood like chairs, furnitures, clothes-hook in particular for clear woods.

Vernice poliuretanica lucida Cod.1160000

Varnish for fixtures, doors, windows, lockings made of wood, boats, whe you want a prestigious finishing. The handworks paint with this product have good resistance to the washing, atmospheric agents and abrasion, with good hardness and elasticity.

Special products

Fosfato digrassante Cod.9060000

It's a chemical product that can phosphatize and degrease metallic surfaces, so they are suitable for the next painting.

Vernice pelabile Cod.1020000

It's a varnish based on synthetic resins, suitable to protect metallic surfaces. if it is applied to the liquid state, it makes solid for evaporation of dissolvents, forming in short time a solid shell, uniform, idrorepellent, impermeable, chemically inert. It's more protecting than oil or degrease. It's easly removable with a tearing.

Fluidificante per stucco a trafila Cod.9030000

Fluidificant for Stucco Sintetico a Trafila, made of a physical dissolvent mixture, resins and particular additives, that allow to the stucco to fludify, maintaining the characteristics of the product unchanged.

Vernice trasparente epossivinilica Cod.1040000

It's a product with high resistance to acids, alkyd and solvents. It has good elasticity and big anchorage.

Vernice per cemento Cod.1170000

It's an antidust alkyd based varnish for cement surfaces. It can be used when cement dusting creates problems.

Fondo impregnate trasparente per calcestruzzo Cod.6070000

Transparent product that has got excellent characteristics of penetration for porous supports like the concrete and the wood.

Malta epossidica autolivellante per pavimentazioni s.718

It's a epoxidic self-leveled mortar for floors, compound by two components that you must mix before the use.

Rivestimento elastico pedonabile s.720

It's an epoxidic elastic self-leveled mortar with one stratum for protection of concrete floors that was subjected to mechanic stress. It's very suitable to coat paving where there are infiltration phenomena, like gym or dancing rooms, ecc.

Diluents

Diluente nitro “829” Cod.829

Diluente nitro antinebbia Cod.8060000

Diluente elettrostatico Cod.807.0000 Cod.8150000

Diluente per smalti a forno Cod.8080000

Diluente per lavaggio Cod.8090000

Diluente 85111 Cod.8100000

Diluente per poliuretanici s.820

Diluente per martellati al forno 85003 Cod.8030000

Diluente 403 Cod.8240000

Acetone Tecnico Cod.8250000

Catalysts

Catalizzatore per epomobil, epovinil, epocatrame Cod.8510000

Catalizzatore per poliuretanici Cod.8520000

Catalizzatore per zincoep Cod.8550000

Catalizzatore per stucco epossidico Cod.8560000

Catalizzatore per fondo epossidico Cod.8580000

Catalizzatore per goffrato Cod.8590000

Catalizzatore per poliuretanico H.S. Cod.8630000

Catalizzatore per fondo impregnante trasparente per calcestruzzo Cod.8640000

Catalizzatore per malta epossidica autolivellante Cod.8660000

Catalizzatore per rivestimento elastico pedonabile Cod.8670000